[ 286.095] X.Org X Server 1.17.4 Release Date: 2015-10-28 [ 286.095] X Protocol Version 11, Revision 0 [ 286.095] Build Operating System: FreeBSD 11.0-CURRENT amd64 [ 286.095] Current Operating System: FreeBSD i5 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r298762M: Thu Apr 28 20:19:13 MDT 2016 root@i5:/usr/obj/usr/src/sys/I5 amd64 [ 286.095] Build Date: 29 April 2016 09:03:56AM [ 286.095] [ 286.096] Current version of pixman: 0.34.0 [ 286.096] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 286.096] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 286.096] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 29 12:53:47 2016 [ 286.096] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d" [ 286.096] (==) No Layout section. Using the first Screen section. [ 286.096] (==) No screen section available. Using defaults. [ 286.096] (**) |-->Screen "Default Screen Section" (0) [ 286.096] (**) | |-->Monitor "" [ 286.097] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 286.097] (**) Option "BlankTime" "0" [ 286.097] (**) Option "StandbyTime" "0" [ 286.097] (**) Option "SuspendTime" "0" [ 286.097] (**) Option "OffTime" "0" [ 286.097] (==) Automatically adding devices [ 286.097] (==) Automatically enabling devices [ 286.097] (==) Not automatically adding GPU devices [ 286.097] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/ [ 286.097] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 286.097] (II) The server relies on devd to provide the list of input devices. If no devices become available, reconfigure devd or disable AutoAddDevices. [ 286.097] (II) Loader magic: 0x81b020 [ 286.097] (II) Module ABI versions: [ 286.097] X.Org ANSI C Emulation: 0.4 [ 286.097] X.Org Video Driver: 19.0 [ 286.097] X.Org XInput driver : 21.0 [ 286.097] X.Org Server Extension : 9.0 [ 286.097] (--) PCI:*(0:0:2:0) 8086:0a16:1028:05ca rev 11, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536 [ 286.097] (II) LoadModule: "glx" [ 286.098] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 286.102] (II) Module glx: vendor="X.Org Foundation" [ 286.102] compiled for 1.17.4, module version = 1.0.0 [ 286.102] ABI class: X.Org Server Extension, version 9.0 [ 286.102] (==) AIGLX enabled [ 286.102] (==) Matched intel as autoconfigured driver 0 [ 286.102] (==) Matched fbdev as autoconfigured driver 1 [ 286.102] (==) Matched vesa as autoconfigured driver 2 [ 286.102] (==) Assigned the driver to the xf86ConfigLayout [ 286.102] (II) LoadModule: "intel" [ 286.102] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 286.102] (II) Module intel: vendor="X.Org Foundation" [ 286.102] compiled for 1.17.4, module version = 2.21.15 [ 286.102] Module class: X.Org Video Driver [ 286.102] ABI class: X.Org Video Driver, version 19.0 [ 286.102] (II) LoadModule: "fbdev" [ 286.103] (WW) Warning, couldn't open module fbdev [ 286.103] (II) UnloadModule: "fbdev" [ 286.103] (II) Unloading fbdev [ 286.103] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 286.103] (II) LoadModule: "vesa" [ 286.103] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 286.103] (II) Module vesa: vendor="X.Org Foundation" [ 286.103] compiled for 1.17.4, module version = 2.3.4 [ 286.103] Module class: X.Org Video Driver [ 286.103] ABI class: X.Org Video Driver, version 19.0 [ 286.103] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 286.104] (II) VESA: driver for VESA chipsets: vesa [ 286.104] (--) Using syscons driver with X support (version 16777218.0) [ 286.104] (--) using VT number 9 [ 286.106] (WW) Falling back to old probe method for vesa [ 286.106] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 286.106] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 286.106] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 286.106] (==) intel(0): RGB weight 888 [ 286.106] (==) intel(0): Default visual is TrueColor [ 286.106] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400 [ 286.107] (**) intel(0): Relaxed fencing enabled [ 286.107] (**) intel(0): Wait on SwapBuffers? enabled [ 286.107] (**) intel(0): Triple buffering? enabled [ 286.107] (**) intel(0): Framebuffer tiled [ 286.107] (**) intel(0): Pixmaps tiled [ 286.107] (**) intel(0): 3D buffers tiled [ 286.107] (**) intel(0): SwapBuffers wait enabled [ 286.107] (==) intel(0): video overlay key set to 0x101fe [ 286.107] (II) intel(0): Output eDP1 has no monitor section [ 286.112] (II) intel(0): Output HDMI1 has no monitor section [ 286.121] (II) intel(0): Output DP1 has no monitor section [ 286.126] (II) intel(0): Output HDMI2 has no monitor section [ 286.135] (II) intel(0): Output DP2 has no monitor section [ 286.136] (II) intel(0): EDID for output eDP1 [ 286.136] (II) intel(0): Manufacturer: LGD Model: 408 Serial#: 0 [ 286.136] (II) intel(0): Year: 2013 Week: 0 [ 286.136] (II) intel(0): EDID Version: 1.4 [ 286.136] (II) intel(0): Digital Display Input [ 286.136] (II) intel(0): 6 bits per channel [ 286.136] (II) intel(0): Digital interface is DisplayPort [ 286.136] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16 [ 286.136] (II) intel(0): Gamma: 2.20 [ 286.136] (II) intel(0): No DPMS capabilities specified [ 286.136] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 286.136] (II) intel(0): First detailed timing is preferred mode [ 286.136] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 286.136] (II) intel(0): redX: 0.597 redY: 0.360 greenX: 0.330 greenY: 0.575 [ 286.136] (II) intel(0): blueX: 0.155 blueY: 0.120 whiteX: 0.313 whiteY: 0.329 [ 286.136] (II) intel(0): Manufacturer's mask: 0 [ 286.136] (II) intel(0): Supported detailed timing: [ 286.136] (II) intel(0): clock: 138.7 MHz Image Size: 276 x 156 mm [ 286.136] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 286.136] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 286.136] (II) intel(0): Supported detailed timing: [ 286.136] (II) intel(0): clock: 138.7 MHz Image Size: 276 x 156 mm [ 286.136] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 286.136] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 286.136] (II) intel(0): 5CXGG€125WF1 [ 286.136] (II) intel(0): Unknown vendor-specific block 0 [ 286.136] (II) intel(0): EDID (in hex): [ 286.136] (II) intel(0): 00ffffffffffff0030e4080400000000 [ 286.136] (II) intel(0): 00170104951c107802d9f5985c549327 [ 286.136] (II) intel(0): 1e505400000001010101010101010101 [ 286.136] (II) intel(0): 0101010101012e3680a070381f403020 [ 286.136] (II) intel(0): 3500149c1000001a2e3680a070381f40 [ 286.136] (II) intel(0): 30203500149c1000001a000000fe0035 [ 286.136] (II) intel(0): 43584747803132355746310a00000000 [ 286.136] (II) intel(0): 00004121a4010000000a010a20200071 [ 286.136] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 286.136] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 286.136] (II) intel(0): Printing probed modes for output eDP1 [ 286.136] (II) intel(0): Modeline "1920x1080"x60.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP) [ 286.136] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 286.136] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 286.136] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 286.136] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 286.136] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 286.136] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 286.136] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 286.141] (II) intel(0): EDID for output HDMI1 [ 286.157] (II) intel(0): EDID for output DP1 [ 286.162] (II) intel(0): EDID for output HDMI2 [ 286.171] (II) intel(0): EDID for output DP2 [ 286.171] (II) intel(0): Output eDP1 connected [ 286.171] (II) intel(0): Output HDMI1 disconnected [ 286.171] (II) intel(0): Output DP1 disconnected [ 286.171] (II) intel(0): Output HDMI2 disconnected [ 286.171] (II) intel(0): Output DP2 disconnected [ 286.171] (II) intel(0): Using exact sizes for initial modes [ 286.171] (II) intel(0): Output eDP1 using initial mode 1920x1080 [ 286.171] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 286.171] (II) intel(0): Kernel page flipping support detected, enabling [ 286.171] (==) intel(0): DPI set to (96, 96) [ 286.171] (II) Loading sub module "fb" [ 286.171] (II) LoadModule: "fb" [ 286.171] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 286.172] (II) Module fb: vendor="X.Org Foundation" [ 286.172] compiled for 1.17.4, module version = 1.0.0 [ 286.172] ABI class: X.Org ANSI C Emulation, version 0.4 [ 286.172] (II) Loading sub module "dri2" [ 286.172] (II) LoadModule: "dri2" [ 286.172] (II) Module "dri2" already built-in [ 286.172] (II) UnloadModule: "vesa" [ 286.172] (II) Unloading vesa [ 286.172] (==) Depth 24 pixmap format is 32 bpp [ 286.172] (II) intel(0): [DRI2] Setup complete [ 286.172] (II) intel(0): [DRI2] DRI driver: i965 [ 286.172] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 286.173] (II) UXA(0): Driver registered support for the following operations: [ 286.173] (II) solid [ 286.173] (II) copy [ 286.173] (II) composite (RENDER acceleration) [ 286.173] (II) put_image [ 286.173] (II) get_image [ 286.173] (==) intel(0): Backing store enabled [ 286.173] (==) intel(0): Silken mouse enabled [ 286.173] (II) intel(0): Initializing HW Cursor [ 286.173] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 286.174] (==) intel(0): DPMS enabled [ 286.174] (==) intel(0): Intel XvMC decoder enabled [ 286.174] (II) intel(0): Set up textured video [ 286.174] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 286.174] (II) intel(0): direct rendering: DRI2 Enabled [ 286.186] (--) RandR disabled [ 286.195] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 286.195] (II) AIGLX: enabled GLX_ARB_create_context [ 286.195] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 286.195] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 286.195] (II) AIGLX: enabled GLX_INTEL_swap_event [ 286.195] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 286.195] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 286.195] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 286.195] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 286.195] (II) AIGLX: Loaded and initialized i965 [ 286.195] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 286.195] (II) intel(0): Setting screen physical size to 508 x 285 [ 286.268] (II) config/devd: probing input devices... [ 286.268] (II) config/devd: adding input device /dev/kbdmux0 [ 286.268] (II) LoadModule: "kbd" [ 286.268] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 286.269] (II) Module kbd: vendor="X.Org Foundation" [ 286.269] compiled for 1.17.4, module version = 1.8.1 [ 286.269] Module class: X.Org XInput Driver [ 286.269] ABI class: X.Org XInput driver, version 21.0 [ 286.269] (II) Using input driver 'kbd' for 'kbdmux0' [ 286.269] (**) kbdmux0: always reports core events [ 286.269] (**) kbdmux0: always reports core events [ 286.269] (**) Option "Protocol" "standard" [ 286.269] (**) Option "XkbRules" "base" [ 286.269] (**) Option "XkbModel" "pc105" [ 286.269] (**) Option "XkbLayout" "us" [ 286.269] (**) Option "config_info" "devd:/dev/kbdmux0" [ 286.269] (II) XINPUT: Adding extended input device "kbdmux0" (type: KEYBOARD, id 6) [ 286.270] (II) config/devd: kbdmux is enabled, ignoring device atkbd0 [ 286.325] (II) config/devd: detected event: Atmel Atmel maXTouch Digitizer, bustype=0003, vendor=03eb, product=8844, version=0111 [ 286.336] (II) config/devd: adding input device /dev/input/event0 [ 286.336] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "Atmel Touchscreen" [ 286.336] (II) LoadModule: "evdev" [ 286.336] (II) Loading /usr/local/lib/xorg/modules/input/evdev_drv.so [ 286.336] (II) Module evdev: vendor="X.Org Foundation" [ 286.336] compiled for 1.17.4, module version = 2.10.2 [ 286.336] Module class: X.Org XInput Driver [ 286.336] ABI class: X.Org XInput driver, version 21.0 [ 286.336] (II) Using input driver 'evdev' for 'Atmel Atmel maXTouch Digitizer' [ 286.336] (**) Atmel Atmel maXTouch Digitizer: always reports core events [ 286.336] (**) evdev: Atmel Atmel maXTouch Digitizer: Device: "/dev/input/event0" [ 286.391] (--) evdev: Atmel Atmel maXTouch Digitizer: Vendor 0x3eb Product 0x8844 [ 286.391] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute axes [ 286.391] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute multitouch axes [ 286.391] (II) evdev: Atmel Atmel maXTouch Digitizer: No buttons found, faking one. [ 286.391] (--) evdev: Atmel Atmel maXTouch Digitizer: Found x and y absolute axes [ 286.391] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute touchscreen [ 286.391] (II) evdev: Atmel Atmel maXTouch Digitizer: Configuring as touchscreen [ 286.391] (**) evdev: Atmel Atmel maXTouch Digitizer: YAxisMapping: buttons 4 and 5 [ 286.391] (**) evdev: Atmel Atmel maXTouch Digitizer: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 286.391] (**) Option "config_info" "devd:/dev/input/event0" [ 286.391] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 7) [ 286.391] (**) Option "Mode" "Absolute" [ 286.391] (II) evdev: Atmel Atmel maXTouch Digitizer: initialized for absolute axes. [ 286.391] (**) Atmel Atmel maXTouch Digitizer: (accel) keeping acceleration scheme 1 [ 286.391] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration profile 0 [ 286.391] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000 [ 286.391] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4 [ 286.392] (WW) fcntl(8, F_SETOWN): Invalid argument [ 286.392] (II) config/devd: kbdmux is enabled, ignoring device kbdmux0 [ 286.392] (II) config/devd: device /dev/psm0 already opened [ 286.392] (II) config/devd: detected mouse: hwid=0000, model=0000, type=0000, iftype=0004, buttons=000a [ 286.392] (II) config/devd: adding input device /dev/sysmouse [ 286.392] (II) LoadModule: "mouse" [ 286.392] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 286.392] (II) Module mouse: vendor="X.Org Foundation" [ 286.392] compiled for 1.17.4, module version = 1.9.1 [ 286.392] Module class: X.Org XInput Driver [ 286.392] ABI class: X.Org XInput driver, version 21.0 [ 286.392] (II) Using input driver 'mouse' for 'sysmouse' [ 286.392] (**) sysmouse: always reports core events [ 286.392] (**) Option "Device" "/dev/sysmouse" [ 286.392] (==) sysmouse: Protocol: "Auto" [ 286.392] (**) sysmouse: always reports core events [ 286.392] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50 [ 286.392] (**) sysmouse: ZAxisMapping: buttons 4 and 5 [ 286.392] (**) sysmouse: Buttons: 5 [ 286.392] (**) Option "config_info" "devd:/dev/sysmouse" [ 286.392] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 8) [ 286.392] (**) sysmouse: (accel) keeping acceleration scheme 1 [ 286.392] (**) sysmouse: (accel) acceleration profile 0 [ 286.392] (**) sysmouse: (accel) acceleration factor: 2.000 [ 286.392] (**) sysmouse: (accel) acceleration threshold: 4 [ 286.392] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0 [ 286.392] (II) sysmouse: SetupAuto: protocol is SysMouse [ 286.392] (II) config/devd: kbdmux is enabled, ignoring device ukbd0 [ 286.392] (II) config/devd: device /dev/ums0 already opened [ 286.398] (II) intel(0): EDID vendor "LGD", prod id 1032 [ 286.398] (II) intel(0): Printing DDC gathered Modelines: [ 286.398] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP) [ 286.771] (II) intel(0): EDID vendor "LGD", prod id 1032 [ 286.771] (II) intel(0): Printing DDC gathered Modelines: [ 286.771] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP) [ 286.805] (II) intel(0): EDID vendor "LGD", prod id 1032 [ 286.805] (II) intel(0): Printing DDC gathered Modelines: [ 286.805] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP) [ 1155.145] (II) config/devd: terminating backend... [ 1155.145] (II) UnloadModule: "mouse" [ 1155.145] (II) evdev: Atmel Atmel maXTouch Digitizer: Close [ 1155.145] (II) UnloadModule: "evdev" [ 1155.146] (II) UnloadModule: "kbd" [ 1156.180] (II) Server terminated successfully (0). Closing log file.